Crest Audio CDVS-4200 Series Operations Instructions download pdf (Page 22)

4-2

Setting the ID on the remote controller

e controller ID can be set from 00-99; is is useful when there are two DVR in close proximity to each

other. e two controllers can be set to use two dierent ID so they will not interfere with each other.

e controller ID must be set in both the remote controller and the DVR. To set the ID on the controller, fol-

low the instructions below:

1) Push and hold the ID button until the red light stays on.

2) Enter the number on the numeric key pad you wish to set as the ID. To use 0-9 you must enter 0

in front of number. Example to set ID to 1, enter 01 in the controller.

3) Press the ID set button; the controller’s red light will blink 3 times and go o. e controller is

now set.

You must now set the ID in the DVR. is can be done using the front panel or the mouse. Follow the in-

structions below for setting the controller ID in the DVR:

1) If you have not logged into the DVR, do so now.

2) Push the menu button on the front panel or right click the mouse button. e menu screen

appears. Click Main Menu. (See Image below.)

Click main menu

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 80 81

No comments

Crest Audio CDVS-4200 Series Operations Instructions Page 22