Crest Audio CDVS-4200 Series Operations Instructions download pdf (Page 58)

7-22

Record (Schedule)

e DVR allows for continuous recording or recording by schedule. To record continuously, just select the

continuous mode in the Record (Setup) window. e Record (Schedule) window allows the user to set each

camera by a schedule. e schedule is broken down by individual camera, day, and hour. ere is even a spe-

cial holiday period which can be set to record dierently than the normal recording mode. To set the record-

ing mode, click the Schedule button on the main Record window. is will bring up the Record (Schedule)

window. Select the camera or cameras you wish to change, click the recording mode you wish the cameras to

record in. e options are :

• Continuous - Will record continuously without regard to motion or sensors. A red dot will

appear in the top right corner of the camera screen indicating that the camera is in continuous

recording mode.

• Motion + Sensor - Will only record when the system detects motion or there is a sensor alarm.

e system will display two icons; a running man and a bell. ese icons will be blue when there is

no sensor alarm or motion indicating that the DVR is in Sensor and Motion record mode. ey

will turn red when there is a sensor alarm or motion is detected. is indicates that the DVR is

recording video while the icon is red.

• Motion - e system will record only when motion is detected. It will stop aer motion has

stopped. e system will display a running man icon. It will be blue when there is no motion

indicating that the DVR is in Motion record mode. It will turn red when there motion is detected.

is indicates that the DVR is recording video while the icon is red. A yellow running man icon

indicates that DVR is not set to record when there is motion, but the motion grid is active and will

display the yellow running man icon when there is motion. If you wish to not have the running

man icon up when recording has been set to something other than motion recording, you must go

into the motion area setup and remove all grids.

• Sensor - e system will only record when there is a sensor alarm. e DVR will record for the

duration of the alarm event. e duration of the event is set up in the Device (Alarm) window

of the Device menu. If the contact is still sending a signal aer the duration period, then another

event will occur and the DVR will record video. A blue bell icon will be displayed indicating that

the DVR is set to record when there is a sensor alarm. It will turn red during the recording of

video. A yellow bell icon indicates that sensor alarming has been set up on the DVR, but it is

not recording based on sensor alarms. To turn o the yellow bell icon you must disable the alarm

in the Device (Alarm) setup window.

• No Recording - is will stop all recording. If the sensor alarm and motion grids are set in the

system they will continue to display when there is a sensor event or motion, but will be displayed in

yellow indicating no recording is taking place.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 80 81

No comments

Crest Audio CDVS-4200 Series Operations Instructions Page 58